Duenne is not an offiicial seller for


EK1122 | 2-port EtherCAT junction
The EK1122 2-port EtherCAT junction can be used in an EtherCAT Terminal segment at any desired position between the EtherCAT Terminals and enables configuration of EtherCAT star topologies. A modular EtherCAT star hub can be realized by using several EK1122 units in a station.
Special features:
Connection technology: 2 x RJ45 sockets
Connection lengths: up to 100 m
Can be used for configuring an EtherCAT star topology
The EK1122 has two RJ45 sockets, which enable connection of an Ethernet cable with RJ45 connector and establish a connection to a further EtherCAT segment or to individual EtherCAT devices. The EK1122 supports coupling and uncoupling of EtherCAT segments during operation (Hot Connect).
Task within EtherCAT system coupling of EtherCAT junctions
Data transfer medium Ethernet/EtherCAT cable (min. Cat.5), shielded
Distance between stations 100 m (100BASE-TX)
Protocol EtherCAT
Delay approx. 1 µs
Data transfer rates 100 Mbit/s
Configuration not required
Bus interface 2 x RJ45
Power supply from E-bus
Current consumption typ. 220 mA
Weight approx. 65 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos. IP20/variable
Approvals/markings CE, UL, ATEX, IECEx, cFMus
Ex marking ATEX:
II 3 G Ex nA IIC T4 Gc
Ex nA IIC T4 Gc
Ex tc IIIC T135 °C Dc
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, AEx ec IIC T4 Gc
Design form compact terminal housing with signal LEDs
Material polycarbonate
Dimensions (W x H x D) 24 mm x 100 mm x 52 mm
Installation on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of double slot and key connection
Marking –
Wiring specific push-in connection

From: 88,00  EXCL.