EL2008-0000 – BECKHOFF

EL2008 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A
The EL2008 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. Each EtherCAT Terminal has eight channels that indicate their signal state via light emitting diodes.
Special features:
Connection of different load types possible (ohmic, inductive, lamp load)
Max. output current 0.5 A per channel
Short-circuit-proof outputs and reverse polarity protection
Connection technology 1-wire
Number of outputs 8
Nominal voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Distributed clocks –
Max. output current 0.5 A (short-circuit proof) per channel
Short-circuit current typ. < 2 A Reverse voltage protection yes Breaking energy < 150 mJ/channel Switching times typ. TON: 60 µs, typ. TOFF: 300 µs Current consumption E-bus typ. 110 mA Electrical isolation 500 V (E-bus/field potential) Current consumption power contacts typ. 15 mA + load Bit width in the process image 8 outputs Configuration no address or configuration setting Weight approx. 55 g Operating/storage temperature -25…+60 °C/-40…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. rating/installation pos. IP20/see documentation Pluggable wiring for all ESxxxx terminals Approvals/markings CE, UL, ATEX, DNV GL, IECEx, cFMus Ex marking ATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex nA IIC T4 Gc Ex tc IIIC T135 °C Dc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc Design form compact terminal housing with signal LEDs Material polycarbonate Dimensions (W x H x D) 12 mm x 100 mm x 68 mm Installation on 35 mm DIN rail, conforming to EN 60715 with lock Side by side mounting by means of double slot and key connection Marking labeling of the BZxxx series Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver Connection cross-section s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² Stripping length 8…9 mm Current load power contacts Imax: 10 A