EL2809-0000 – BECKHOFF

EL2809 | EtherCAT Terminal, 16-channel digital output, 24 V DC, 0.5 A
The EL2809 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. The EtherCAT Terminal has 16 channels, whose signal states are indicated by LEDs. The power contacts are connected through. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the EL2809. In the EL2809 the outputs are supplied via the 24 V DC power contact.
Special features:
Connection of different load types possible (ohmic, inductive, lamp load)
Max. output current 0.5 A per channel
Overload and short-circuit proof outputs and reverse polarity protection
Tool-free connection by direct plug-in technology for solid wire conductors
Space-saving use in the control cabinet
Direct connection of multi-channel actuators in 1-wire connection technology in the smallest space
Increased packing density with 16 connection points in the housing of a 12 mm terminal block
Connection technology 1-wire
Number of outputs 16
Nominal voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Distributed clocks –
Max. output current 0.5 A (short-circuit proof) per channel
Short-circuit current typ. < 2 A Reverse voltage protection yes Breaking energy < 150 mJ/channel Switching times typ. TON: 60 µs, typ. TOFF: 300 µs Current consumption E-bus typ. 140 mA Electrical isolation 500 V (E-bus/field potential) Current consumption power contacts typ. 35 mA + load Bit width in the process image 16 outputs Configuration no address or configuration setting Weight approx. 70 g Operating/storage temperature -25…+60 °C/-40…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. rating/installation pos. IP20/variable Approvals/markings CE, UL, ATEX, DNV GL, IECEx, cFMus Ex marking ATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex nA IIC T4 Gc Ex tc IIIC T135 °C Dc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc Design form HD (High Density) housing with signal LEDs Material polycarbonate Dimensions (W x H x D) 12 mm x 100 mm x 68 mm Installation on 35 mm DIN rail, conforming to EN 60715 with lock Side by side mounting by means of double slot and key connection Marking labeling of the BZxxx series Wiring solid conductors (e): direct plug-in technique; fine-stranded conductors (f) and ferrule (a): spring actuation by screwdriver Connection cross-section s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² Connection cross-section AWG s*: AWG 28…16, st*: AWG 22…16, f*: AWG 26…19 Stripping length 8…9 mm Current load power contacts Imax: 10 A