Duenne is not an offiicial seller for

EL3351

EL3351 | EtherCAT Terminal, 1-channel analog input, measuring bridge, full bridge, 16 bit
The EL3351 analog input terminal permits direct connection of a resistor bridge. The bridge voltage, UD, and the supply voltage, UREF, to the bridge are digitized with a 16 bit resolution, and are transmitted along an electrically isolated channel to the supervising automation system. The input channels are available in the form of two 16 bit values for further processing. The resulting measurement can be calculated from the formula: measurement = UD/UREF. Precise acquisition of the supply voltage along with the bridge voltage compensates for long-term and temperature drift.
Technical data EL3351
Number of inputs 2, for 1 resistor bridge in full bridge technology
Power supply via the E-bus
Technology resistor bridge, strain gauge
Signal type differential
Distributed clocks –
Measuring range UD max. -20…+20 mV
Measuring range UREF max. -12…+12 V
Internal resistance > 200 kΩ (UREF), > 1 MΩ (UD)
Input filter limit frequency 50 Hz default setting, parameterizable
Conversion time 2.5…800 ms, configurable, max. 400 samples/s
Power supply UV 5 V, max. 20 mA
Resolution 16 bit, 32 bit presentation
Filter 50 Hz, configurable
Measurement error/ uncertainty < ±0.1 % (relative to full scale value, 50 Hz filter) Current consumption power contacts – Current consumption E-bus typ. 170 mA Supported nominal sensitivity calculated in PLC, freely selectable Special features integrated 5 V DC bridge supply Weight approx. 60 g Operating/storage temperature 0…+55 °C/-25…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. rating/installation pos. IP20/variable Pluggable wiring for all ESxxxx terminals Approvals/markings CE, UL, ATEX Ex marking II 3 G Ex nA IIC T4 Gc Housing data EL-12-8pin Design form compact terminal housing with signal LEDs Material polycarbonate Dimensions (W x H x D) 12 mm x 100 mm x 68 mm Installation on 35 mm DIN rail, conforming to EN 60715 with lock Side by side mounting by means of double slot and key connection Marking labeling of the BZxxx series Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver Connection cross-section s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² Connection cross-section AWG s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 s* Stripping length 8…9 mm Current load power contacts Imax: 10 A *s: solid wire; st: stranded wire; f: with ferrule

The price refers to the new product with original packaging.
Contact us at info@duenne.it to check the condition of the product before buying it

30 in stock

30 in stock

Bestsellers: