EP2318-0002 – BECKHOFF

EP2318-0002
EtherCAT Box, 4-channel digital input + 4-channel digital output, 24 V DC, 10 µs, 0.5 A, M12
The EP2318-0002 EtherCAT Box combines four digital inputs (two M12 sockets at the top) and four digital outputs (two M12 sockets at the bottom) in one device. The inputs have a filter of 10 µs. The outputs process load currents up to 0.5 A, are short-circuit-proof and protected against reverse polarity. The signal status is indicated by LEDs. The signals are connected via M12 screw type connectors. Two channels are available per M12 socket.
The supply of the connected sensors is carried out via an internal, short-circuit-proof driver module with a total of 0.5 A for all sensors. The outputs are supplied via UP. All outputs are short-circuit-proof and protected against reverse polarity.
Technical data EP2318-0002
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type
Specification EN 61131-2, type 1/3
Number of channels 4 inputs + 4 outputs
Input/output connections M12, screw type
Input filter 10 µs
“0” signal voltage -3…+5 V
“1” signal voltage 11…30 V, 6 mA input current (EN 61131-2, type 3)
Sensor supply from control voltage, max. 0.5 A, short-circuit proof in total
Load type ohmic, inductive, lamp load
Rated load voltage 24 V DC (-15 %/+20 %)
Max. output current 0.5 A per channel, individually short-circuit proof
Switching times typ. TON: 50 µs, typ. TOFF: 100 µs
Short-circuit current typ. 1.5 A
Current consumption 120 mA
Auxiliary power current typ. 20 mA + load
Power supply connection feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Electrical isolation 500 V
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Approvals/markings CE, UL, ATEX
Protect. rating/installation pos. IP65/66/67 (conforms to EN 60529)/variable
Ex marking II 3 G Ex nA IIC T4 Gc
Dimensions
Housing data 8 x M8, 4 x M12
Dimensions (W x H x D) 30 mm x 126 mm x 26.5 mm
Material PA6 (polyamide)
Installation 2 fixing holes 3.5 mm diameter for M3