Duenne is not an offiicial seller for BECKHOFF
KL6001 – BECKHOFF
Bus Terminal, 1-channel communication interface, serial, RS232
The KL6001 serial interface allows devices with an RS232 interface to be connected. The interface operates in conformity with the CCITT V.28/DIN 66 259-1 standards. The device connected to the terminal communicates with the automation device via the Bus Coupler. The active communication channel operates independently of the higher-level bus system in full duplex mode at up to 19,200 baud. The RS232 interface guarantees high immunity to interference through electrically isolated signals.
Technical data KL6001
Data transfer channels 2 (1/1), TxD and RxD, full duplex
Data transfer rates 1200…19,200 baud; default: 9600 baud, 8 data bits, no parity and one stop bit
Bit distortion < 3 % Line impedance – Cable length max. 15 m “0” signal voltage -18…-3 V “1” signal voltage 3…18 V Power supply via the K-bus Current consumption K-bus typ. 55 mA Current consumption power contacts – (no power contacts) Electrical isolation 500 V (K-bus/signal voltage) Data buffer 128 bytes receive buffer, 16 bytes transmit buffer Bit width in the process image input/output: 3 x 8 bit user data, 1 x 8 bit control/status (up to 5 x 8 bit user data are possible) Configuration no address setting, configuration via Bus Coupler or controller Special features high interference immunity, electrically isolated signals Weight approx. 80 g Operating/storage temperature 0…+55 °C/-25…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. rating/installation pos. IP20/variable Pluggable wiring for all KSxxxx Bus Terminals Approvals/markings CE, UL, ATEX, IECEx Ex marking ATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex ec IIC T4 Gc Housing data KL-12-8pin Design form compact terminal housing with signal LEDs Material polycarbonate Dimensions (W x H x D) 12 mm x 100 mm x 68 mm Installation on 35 mm DIN rail, conforming to EN 60715 with lock Side by side mounting by means of double slot and key connection Marking labeling of the BZxxx series Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver Connection cross-section s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² Connection cross-section AWG s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 s Stripping length 8…9 mm Current load power contacts Imax: 10 A *s: solid wire; st: stranded wire; f: with ferrule
From: 405,00 € EXCL.