539158 – FESTO

Valve function
5/2 vie, monostable

Drive type
Electric

Length
26 mm
Standard nominal flow rate
1100 l/min

pneumatic work door
Sub-base size 26 mm to ISO 15407-1
Sub-base size 01 to VDMA 24563
G1/4
Operating voltage
24V DC
Operating pressure
-0.09 MPa … 1 MPa

Work pressure
-0.9 bar … 10 bar

Design
Piston gate valve

Reset type
Pneumatic spring

Approval
c UL us – Recognized (OL)
Degree of protection
IP65

NEMA 4

Exhaust air function
With flow control option

Via throttle plate

Via single sub-base

Principle of sealing
Soft

Mounting position
Optional

Manual override
With stop

Without stop

Covered

Type of piloting
Piloted

Pilot air
External

Internal

Direction of flow
Optional

Symbol
00991050

lap
Positive overlap

Signal status display
LED
Pilot pressure Mpa
0.3 MPa … 1 MPa

Pilot pressure
3 bar … 10 bar

Flow rate of the valve
1400 l/min

Valve flow on single sub-base
1200 l/min

Valve flow, pneumatically connected, optimized flow
1350 l/min

Flow rate of the pneumatic valve on sub-base
1100 l/min

Shutdown time
45 ms
Ignition time
25 ms
Working cycle
100%

Max. Positive test pulse with 0 signal
1200 µs
Max. Negative test pulse with 1 signal
1100 µs
Current consumption max.
72 mA

Rated operating voltage DC
24 V

Coil data characteristics
24 V DC: 1,6 W
Surge immunity
2.5 kV
Degree of pollution
3

Permissible fluctuations for the supply voltage
+/- 10%

Working fluid
Compressed air according to ISO 8573-1: 2010 [7: 4: 4]

Note on operating and control fluid
Possibility of lubricated operation (in this case a lubricated operation will always be required)

Vibration resistance
Application test for transport with severity level 2 according to FN 942017-4 and EN 60068-2-6

Impact resistance
Impact test with severity level 2 according to FN 942017-5 and EN 60068-2-27

Corrosion resistance class CRC
0 – No corrosion or stress

Relative humidity of the air
0 – 90%

Pilot fluid
Compressed air according to ISO 8573-1: 2010 [7: 4: 4]

Room temperature
-5 °C … 50 °C
Product weight
293 g
Electrical connection

Plug-in According to ISO 15407-2

Mounting type
On sub-base

12/14 pilot air connection
Sub-base size 26 mm according to ISO 15407-2

Exhaust of the servo drive 82/84
Ducted

Not ducted as per standard

Both:

Pneumatic connection, port 1
Dimension of the sub-base 26 mm according to ISO 15407-2

Pneumatic connection, port 2
Sub-base size 26 mm according to ISO 15407-2

Pneumatic connection, port 3
Dimension of the sub-base 26 mm according to ISO 15407-2

Pneumatic connection, port 4
Dimension of the sub-base 26 mm according to ISO 15407-2

Pneumatic connection, connection 5
Dimension of the sub-base 26 mm according to ISO 15407-2

Note on materials
Complies with EU directive 2002/95 (RoHS)

Seals material
FPM

HNBR

NBR

Body material

PA die-cast aluminum

Screw material
Galvanized steel