Duenne is not an offiicial seller for

1511857 – PHOENIX

Connector – SACC-M12MS-8CON-PG 9-SH
1511857 PHOENIX
Connector, Universal, 8-position, shielded, Plug straight M12, Coding: A, Screw connection, knurl material: Nickel-plated brass, external cable diameter 6 mm … 8 mm
Assembly instruction: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Product type Circular connector (cable-side)
Number of positions 8
No. of cable outlets 1
Shielded yes
Coding A – standard
Cable outlet straight
Insulation characteristics
Overvoltage category II
Degree of pollution 3
Degree of protection IP67
Ambient temperature (operation) -40 °C … 85 °C (Plug / socket)
Dimensional drawing
Width 20 mm
Height 20 mm
Length 62 mm
External dimensions
Outside diameter 6 mm … 8 mm
Housing
Diameter housing 20 mm
Insertion/withdrawal cycles ≥ 100
Connection 1
Head design Plug
Head cable outlet straight
Head thread type M12
Coding A-coded
Rated surge voltage 0.8 kV
Contact resistance ≤ 8 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 30 V AC
30 V DC
Nominal current IN 2 A
Flammability rating according to UL 94 HB
Sealing material Silicon
Material of grip body Nickel-plated brass
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Cable gland material Nickel-plated brass
Conductor connection
Connection method Screw connection
Connection cross section 0.25 mm² … 0.5 mm² (without ferrule)
0.14 mm² … 0.34 mm² (with ferrule)
0.25 mm² … 0.5 mm² (solid)
Connection cross section AWG 24 … 20 (without ferrule)
26 … 22 (with ferrule)
Tightening torque 0.4 Nm (M12 knurl)
0.2 Nm (Screw terminal blocks)
1 Nm (Pressure nut with coupling sleeve)
Standards/specifications IEC 61076-2-101
Signal type/category Universal
Stripping length of the individual wire 5 mm

From: 30,00  EXCL.

Disponibile

Bestsellers: