Duenne is not an offiicial seller for

1511860 – PHOENIX

Connectors – SACC-M12FS-8CON-PG 9-SH
1511860 PHOENIX
Connector, Universal, 8-pole, shielded, Socket straight M12, Coding: A, Screw connection, knurled material: Brass, nickel-plated, external conductor diameter 6 mm … 8 mm
Assembly note: IMPORTANT: When laying the cables, pay attention to the permissible bending radii, as bending forces that are too large damage the degree of protection. Discharge the connector from mechanical loads, eg. with cable clamps.
Product type Circular connectors (cable side)
No. poles 8
Number of cable outlets 1
Shielded Yes
Coding A – standard
Cable outlet right
Features of insulation
Overvoltage category II
Degree of pollution 3
Degree of protection IP67
Ambient temperature (operation) -40 ° C … 85 ° C (female connector / connector)
Quoted design
Length 20 mm
Height 20 mm
Length 57 mm
External Mesure
Outer diameter 6 mm … 8 mm
Case diameter 20 mm
Maneuver cycles ≥ 100
Connection 1
Head structure Female
Head cable outlet right
Head thread type M12
Coding coding A
Impulsive dimensioning voltage 0.8 kV
Mass resistivity ≤ 8 mΩ
Insulation resistance ≥ 100 MΩ
Rated voltage U N 30 V AC
30 V DC
Rated current I N 2 A
Combustion class according to UL 94 HB
Gasket material Silicone
Handle material brass, nickel-plated
Contact material CuZn
Contact surface material Au
Contact insert material PA
Screw material Brass, nickel-plated
Conductor connection
Connection Screw connection
Connection section 0.25 mm² … 0.5 mm² (without cable lug)
0.14 mm² … 0.34 mm² (with cable lug)
0.25 mm² … 0.5 mm² (rigid)
AWG connection section 24 … 20 (without cable lug)
26 … 22 (with cable lug)
Tightening torque 0.4 Nm (M12 ring nut)
0.2 N.m (screw terminals)
1 Nm (Compression nut with coupling ring)
Standards / regulations IEC 61076-2-101
Cable structure
Signal type / category Universal
Length of the section to be stripped of the single wires 5 mm

From: 25,00  EXCL.