Duenne is not an offiicial seller for

1681800 – PHOENIX

Sensor / actuator cable – SAC-4P-M 8MS / 5,0-PUR
1681800 PHOENIX
Sensor / actuator cable, 4-pin, PUR halogen-free, black-gray RAL 7021, Plug straight M8, on free cable end, cable length: 5 m
Gasket material NBR
Handle material TPU, hardly flammable, self-extinguishing
Contact material CuSn
Contact surface material Ni / Au
Contact insert material TPU GF
Screw material Zinc die-cast, nickel-plated
Mass resistivity ≤ 5 mΩ
Insulation resistance ≥ 100 MΩ
Rated voltage U N 48 V AC
60 V DC
Rated current I N 4 A
Protection circuit without circuit
Conductor connection
Tightening torque 0.2 Nm (M8 connectors)
Maneuver cycles ≥ 100
Connection 1
Head structure Male
Head cable outlet right
Head thread type M8
Connection 2
Head structure free conductor end
Status reporting No
Status indication available No
Cable length 5 m
Line weight 23 kg / km
UL AWM Style 20549/10493 (80 ° C / 300 V)
No. poles 4
Shielded no
Cable type PUR halogen-free black [PUR]
Line signal conductor structure 32x 0.10 mm
AWG signal line 24
Conductor cross section 4x 0.25 mm² (Signal line)
Wire diameter with insulating sheath 1.17mm ± 0.02mm (Signal line)
Conductor outer diameter 3.95 mm ± 0.15 mm
Outer sheath, material EVEN THOUGH
Outer sheath, color gray-black RAL 7021
Conductor material Bare Cu wire
Material, wire insulation PP
Single conductor, color brown, white, blue, black
Wall thickness insulation ≥ 0.21 mm (Wire insulation)
ca. 0.5 mm (Outer sheath)
Whole stranding 4 longitudinally twisted wires
Conductor resistance max. max. 78 Ω / km (at 20 ° C)
Insulation resistance ≥ 100 GΩ * km (at 20 ° C)
Rated cable voltage ≤ 300 V
Test voltage ≥ 3000 V
Minimum bending radius, fixed 20 mm
Minimum bending radius, movable 40 mm
Bending cycles, maximum 10000000
Absence of halogens according to DIN VDE 0472 Part 815
Resistance to flame according to UL 758/1581 FT2
DIN EN 60332-2-2 (20 s)
Resistance to oil in accordance with DIN EN 60811-2-1
More resistance Excellent resistance against acids, lyes and solvents
Resistance to hydrolysis and microbes
UV resistant according to DIN EN ISO 4892-2-A
Particular characteristics for e-chain®
silicone free
without paint impregnated substances
Ambient temperature (operation) -40 ° C … 80 ° C (cables, fixed installation)
-25 ° C … 80 ° C (Cables, mobile laying)
Degree of protection IP65
Ambient temperature (operation) -25 ° C … 90 ° C (female connector / connector)
Standards / regulations IEC 61076-2-104

From: 13,00  EXCL.